[updated] — V2000-c User Manual

Thank you for purchasing the . This device is designed for [fictional purpose: industrial data logging / portable environmental monitoring / multi-band signal analysis]. Please read this manual carefully before operation.

Use the wire to connect an exit button for interior egress. 3. Initial Programming Setup To enter programming mode, you must use the Master Code . Default Master Code: 999999 v2000-c user manual

Upon activation, the unit will scan the immediate area and lock onto the nearest human heat signature. It will speak its Wake Phrase: "Unit V2000-C online. Designation: [User Name]. Awaiting command." Thank you for purchasing the

: Always verify 12V +/- polarity before powering on to avoid damaging the internal circuitry. Maintenance Use the wire to connect an exit button for interior egress

The V2000-C is a standalone RFID access control keypad typically used for securing single doors, gates, or offices. It supports multiple entry methods, including RFID cards (125KHz), 4-to-8 digit PIN codes, or a combination of both. Technical Specifications 12VDC ± 10%.