Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Upd [patched] 🎯 Popular

| Parameter | Value | |-----------|-------| | Model | Life Probo PR70 | | Power Supply | 100–240V AC, 50/60Hz | | Power Consumption | 45W (max) | | Operating Temp. | 5°C – 40°C | | Protection Class | IP21 | | Dimensions (mm) | 310 x 180 x 90 | | Net Weight | 2.2 kg |

| Code | Meaning | User Action | |------|---------|--------------| | | Low inlet pressure (<20 psi) | Open water valve fully; check for kinked hose. | | E02 | Filter bypass | Re-seat PR70-P1. Press SET to reset. | | E03 | UV lamp failure | Replace PR70-P3 lamp. Contact support if persistent. | | E04 | Fan motor stuck (air version) | Remove obstruction from grille. Power cycle. | | E05 | TDS sensor drift | Run calibration with provided solution (see 8.2). | | E07 | Internal leak detected | Unplug immediately. Call service. | | F01 | Firmware mismatch | Re-run USB update from Page 5. | | Parameter | Value | |-----------|-------| | Model

PR70 Document Version: 2.2 (Upd) Total Pages: 10 Press SET to reset

PR70 (Firmware v.2.0+) Document Version: 10-Page Comprehensive Guide Revision Date: Updated for 2026-2027 Compliance | | E04 | Fan motor stuck (air