Error Codes — Jungheinrich Etv 216

Provides the specific sub-index or detail for that particular fault. Common Jungheinrich ETV 216 Error Codes

Ensure the battery door is fully closed and the sensor is engaged. Battery discharged Charge the battery immediately (battery is at 0%). 1901.1 Drive pedal active at startup Release the drive pedal before turning the truck on. 1908.1 Seat belt/lock open Close the seat belt/lock before pressing the drive pedal. 1917.1 Simultaneous braking/driving jungheinrich etv 216 error codes

: Drive pedal is activated, but no travel direction has been selected. Provides the specific sub-index or detail for that

The CAN-based LED light cluster on the right side is not responding. The CAN-based LED light cluster on the right

You don't always need a laptop. If the truck is beeping but still moves, try this procedure:

| Code Group | Reset Method | Required Condition | | :--- | :--- | :--- | | (hard faults) | Software clear only | Repair verified & key cycle | | H (thermal) | Auto-reset | Temp drops below threshold | | F371 (low voltage) | Auto-reset | Charge >30% SOC | | U043 (joystick) | Manual recalibration | Centering + software wizard | | C2xx (CAN) | Battery disconnect | Disconnect battery for 10 min |