Foxconn N15235 Front Panel Connectors - Google _verified_ -

For LEDs, look for a small arrow on the plastic connector—this indicates the positive (+) Missing Pin:

If you are still stuck, search for "HP Compaq SG3-350UK Service Manual" – that document contains the official OEM schematic for the Foxconn N15235. Foxconn N15235 Front Panel Connectors - Google

This is your most important connection. It doesn’t matter which way you plug it in. Connect the two wires from your case labeled PWR_SW or Power SW to Pins 3 & 4 (Top row, positions 3 and 4 from the left). For LEDs, look for a small arrow on

| Pin | Signal | Function | Wire Color (Typical) | | :--- | :--- | :--- | :--- | | | +5V | Power LED (+) | Green / White | | 3 | GND | Power LED (-) | White | | 5 | HDD+ | HDD LED (+) | Red / Orange | | 7 | GND | HDD LED (-) | White / Black | | 9 | GND | Key / No pin | N/A | | 2 | PWR_BTN+ | Power Switch | Orange / Blue | | 4 | GND | Power Switch Ground | White | | 6 | RESET+ | Reset Switch | Blue / Yellow | | 8 | GND | Reset Ground | White | Connect the two wires from your case labeled

To connect your front panel headers to your Foxconn N15235 motherboard, follow these steps:

Are you currently a PC with this board and need a specific wiring diagram ?

On some revisions of the N15235 (often found in HP Pavilion a6000 series), Pins 2 and 4 are reversed. If your PC doesn't turn on after wiring, swap the Power Switch plug 180 degrees.