Published Date : 17 Aug 2018
Last Updated : 24 Jun 2025
Content Ref: TEC6393775
Operating System
(none)
Part No
(none)
Summary
Provides steps to configure Groupcall Xporter for SIMS.
Requirements
You will need to download and install Groupcall Xporter, either:
On your SIMS server, where you use SIMS on-premises, or
On any other server where ESS (the vendors of SIMS)Â have installed their Third Party Connector* software.
*The Third Party Connector is a locally installed SIMS computer client, along with a VPN setup to permit connection to hosted SIMS service. It is also a specific requirement for Xporter if you are using SIMS Connected.
For more information, please refer to DWN4153727 (see the Other Useful Articles section below) and the Possible Issues section below.
Procedure
Enter your SIMS logon details and click Login. NOTE: for the SIMS user we recommend a complex password. This is a mixture of upper and lowercase letters, numbers and symbols, which should be at least 12 characters long and, in this case, does not need to be memorable.
When connection to your MIS is confirmed, click Next. Note: Groupcall advises that the SIMS user entered into the Xporter configuration wizard needs to be a member of the following groups in SIMS:
School Administrator
Senior management team
Personnel officer
Third party reporting
Return to step 12 of DWN4153727 from the Other Useful Articles section below to complete the installation.
Possible Issues
If you have any connectivity issues between Xporter and SIMS or SIMS Connected, please re-check your SIMS user's credentials and also check this Groupcall support article.
More Information
SIMS Connected
SIMS Connected was previously known as cloud-based SIMS or Hosted SIMS and renamed following the sale of SIMS from Capita to ESS. This is where SIMS is not on-premises. Groupcall Xporter can still be installed locally and connected in the same way as long as the Third Party Connector/VPN tool is installed, as per the Requirements section above.
Firstchip Fc1178 Fc1179 Mptools V1052 Link Jun 2026
Elektroda.com : Useful for community troubleshooting and alternative mirror links.
: This version is highly optimized for the FC1178BC , FC1178E , and FC1179 series, which are commonly found in budget or unbranded USB drives. firstchip fc1178 fc1179 mptools v1052 link
FirstChip FC1178/FC1179 MpTools (Mass Production Tools) are specialized software utilities used to repair, format, and restore USB flash drives that utilize FirstChip controllers. These tools are essential for fixing common firmware-related issues that standard Windows formatting cannot resolve. Key Features and Use Cases Elektroda
Functionally, MPTools v1052 serves a specific purpose: to "re-flash" the drive. When a user connects a faulty Firstchip drive and launches the software, the tool attempts to handshake with the controller. If successful, it allows the user to perform a low-level format. This is distinct from a standard Windows or macOS format. A low-level format resets the controller to its factory state, rewrites the firmware, and creates a new translation layer between the controller and the NAND memory. In doing so, it clears the "Bad Block" tables and can resolve the "disk is write-protected" errors that plague these devices. Additionally, the tool allows for configuration changes, such as setting the drive as a CD-ROM partition or adjusting the VID (Vendor ID) and PID (Product ID), features used by manufacturers but rarely by end-users.
If you want, I can:
If this article has not helped provide a solution then it is also possible to
log a call...
Document Keywords: Groupcall Xporter, Groupcall, SIMS, MIS, How to configure the Groupcall Xporter on SIMS server, hosted, cloud-based, hosted sims, cloud, How to configure the Groupcall Xporter for hosted SIMS, TEC6393775, connect, connected, ess
Requirements
