Decastar 150e Manual Repack Direct

: For Gasless (Flux-Cored) welding, you must reverse the polarity. Ensure the instructions under the machine's lid are followed to match the wire type.

| Parameter | Function | Typical Setting | Notes | |-----------|----------|-----------------|-------| | P0.01 | Run command source | 0 (Keypad) or 1 (Terminal) | Set to 1 for external start/stop | | P0.02 | Frequency reference source | 0 (Keypad) or 1 (AI1 analog) | Use 1 for external potentiometer | | P0.03 | Max output frequency | 50.0 Hz or 60.0 Hz | Match motor nameplate | | P1.01 | Motor rated voltage | 230 V | Match motor nameplate | | P1.02 | Motor rated current | See motor nameplate | | | P1.05 | Acceleration time | 5.0–10.0 seconds | Longer for high inertia loads | | P1.06 | Deceleration time | 5.0–10.0 seconds | Add braking resistor if needed | | P4.00 | V/f pattern | 0 (Constant torque) or 1 (Fan/pump) | Use 1 for quadratic torque loads | decastar 150e manual

If you see flashing, the ADC is saturated—immediate check load cell input (typically > 3mV/V or broken cable). : For Gasless (Flux-Cored) welding, you must reverse

Approximately 35% at max output (weld for ~3.5 minutes, cool for ~6.5). Weight: 30 kg (66 lbs). Approximately 35% at max output (weld for ~3

: Fine-tune the arc using the stepless manual wire feed adjustment knob. Maintenance and Safety Precautions