Let me know in the comments – I’m happy to help further.
| Error Message | Cause | Solution | |----------------|--------|----------| | “Communication error” | USB cable loose or wrong driver | Use Epson L3060 driver from official site first. Try different USB port. | | “Model not supported” | Wrong program version | Find a newer adjustment program (v2.2.0+). | | “Counter reset failed” | EEPROM write protection | Run the program as Admin. Some firmwares block reset; you may need a firmware downgrade first. | | Printer still shows error after reset | Physical pad full or sensor issue | Open printer, clean or replace waste pads. Check the pad sensor lever. | adjustment program epson l3060
The most common use. The printer tracks how much ink has been flushed into its internal waste ink pads. Once this counter hits a limit (usually around 7000-10000 pages), the printer stops and shows a "Service Required" error (e.g., "Parts inside your printer are at the end of their service life"). The Adjustment Program resets this counter. Let me know in the comments – I’m happy to help further